Select a position within the windscreen so that the top of the unit has a clear view of the sky, remembering that you need to connect the power connection cable as well as ensuring that you can read the LCD display and reach the controls safely.
- Clean the area where you wish to position the bracket thoroughly with a good quality glass cleaner
- Adjust the angle of the bracket so that when the unit is attached to it you can view the display and operate the controls safely. Do not adjust the angle of the bracket when My-Speed is attached.
- Press the suction cup against the windscreen
- Slide My-Speed onto the bracket.
- To remove My-Speed from the windscreen bracket, simply slide the unit upwards off the plate.
- Power the device using the power cable provided. Connect the USB plug on one end of the power cable into the socket marked USB on the back of My-Speed and plug the larger plug into the cigarette lighter socket of your vehicle. To turn on My-Speed press and hold the power button on the front of the device for 2 seconds.
Please note that no power cable other than the one provided with My Speed should be
used. My Speed operates on 5V DC and the power cable included is specifically designed
to provide this voltage. Using an alternative power cable could damage the unit and will
void the warranty.
Do not leave My-Speed plugged into the cigarette lighter socket when you start your
vehicle. The cigarette lighter socket is prone to power surges as the vehicle is started and
this may cause damage to your unit. |
